Figure 17: NVIDIA M6 GPU Option Kit
T-shaped wrench2NVIDIA M6 GPU (CPU and heat sink)1
Custom standoff3
Before you begin
Before installing the NVIDIA M6 GPU:
• Remove any adapter card, such as a VIC 1380, VIC 1280, or VIC port expander card from slot 2. You
cannot use any other card in slot 2 when the NVIDIA M6 GPU is installed.
• Upgrade the Cisco UCS domain that the GPU will installed into to a version of Cisco UCS Manager that
supports this card. Refer to the latest version of the Release Notes for Cisco UCS Software at the following
URL for information about supported hardware: http://www.cisco.com/c/en/us/support/
servers-unified-computing/ucs-manager/products-release-notes-list.html.
Procedure
Step 1 Use the T-shaped wrench that comes with the GPU to remove the existing standoff at the back end of the
motherboard.
Servicing a Blade Server
20
Servicing a Blade Server
Installing the NVIDIA M6 GPU Adapter Card
To Next Page
Loading...
