Cisco UCS C200 M2 - Page 57

Cisco UCS C200 M2 High-Density SFF Drive Rack-Mount Server
TECHNICAL SPECIFICATIONS
57
For configuration-specific power specifications, use the Cisco UCS Power Calculator at this URL:
http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/.
As an example, using the calculator, we can determine the approximate power for the following C200 M2
SFF server configuration:
■ Voltage = 115 VAC
■ Power Supplies = 2
■ Processors = 2 CPUs (Intel Xeon 2.93 GHz X5670)
■ Memory DIMMs = 12 x 4 GB
■ Disk Drives = 4 x 1 TB
■ PCIe Cards = 2
■ PCIe RAID Card = 0
The resulting power calculations are:
■ Idle Power = 219 W
■ 50% Load Power = 364 W
■ Max Power = 506 W