Cisco UCS C210 - Default Chapter; Table of Contents

iii
Cisco UCS C210 Server Installation and Service Guide
OL-20887-02
CONTENTS
Preface vii
Related Documentation vii
Audience vii
Organization vii
Conventions viii
Obtaining Documentation and Submitting a Service Request xiii
CHAPTER 1 Overview 1-1
CHAPTER 2 Installing the Server 2-1
Unpacking and Inspecting the Server 2-2
Preparing for Installation 2-3
Installation Guidelines 2-3
Rack Requirements 2-4
Required Equipment 2-4
Installing the Server Into a Rack 2-4
Initial Server Setup 2-9
Connecting and Powering On the Server (Standalone Mode) 2-9
NIC Modes and NIC Redundancy Settings 2-12
System BIOS and CIMC Firmware 2-13
Updating the BIOS and CIMC Firmware 2-13
Accessing the System BIOS 2-14
Motherboard Jumpers 2-15
Using the BIOS Recovery Jumper J1E5 to Recover Corrupt BIOS 2-16
Clearing the CIMC Admin Password Using Jumper J45 2-17
Using the Clear CMOS Jumper J1E6 2-18
Clearing the BIOS Admin Password Using Jumper J1E4 2-19
CHAPTER 3 Maintaining the Server 3-1
Server Monitoring and Management Tools 3-1
Cisco Integrated Management Interface (CIMC) 3-1
Server Configuration Utility 3-1
Status LEDs 3-2