Cisco UCS C240 M3 Specifications

Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
CONFIGURING the SERVER
21
— DIMM population (how many DIMMs per channel are populated)
— BIOS setting.
For the DIMMs to run in power-savings mode (1.35 V, if the DIMM supports this), change
the BIOS setting to power-savings mode.
■ With 3 RDIMMs populated per channel, memory always runs at 1.5 V regardless if the BIOS
setting is power-savings mode (1.35 V) or performance mode (1.5 V).
■ With 3 LRDIMMs populated per channel, memory can operate at 1.5 V or 1.35 V, depending
on the BIOS setting.
■ With 3 DIMMs populated per channel, 16 GB and 8 GB 1600-MHz RDIMMs run at a maximum
speed of 1333 and 1066 MHz, respectively (for 1600- and 1866-MHz CPUs). Other memory
devices are limited to 1066 MHz operation when populated at 3 DPC.
For more information regarding memory, see CPUs and DIMMs, page 64.

Cisco UCS C240 M3 Specifications

General

Processor cores	8
Processor model	E5-2600
Processor frequency	2.7 GHz
Number of processors installed	2
HDD size	2.5 \
RAID support	Yes
HDD interface	-
Optical drive type	No
Total storage capacity	300 GB
Maximum storage capacity	- TB
Number of HDDs installed	16
Memory slots	24
Internal memory	96 GB
Memory clock speed	1866 MHz
Internal memory type	DDR3-SDRAM
Maximum internal memory	- GB
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express x8 slots	3
Chassis type	Rack (2U)
Power supply	650 W
Operating altitude	0 - 3000 m
Non-operating altitude	0 - 12000 m
Operating temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 93 %
Operating relative humidity (H-H)	10 - 90 %
Harmonized System (HS) code	84714100

Weight and Dimensions

Depth	712 mm
Width	445 mm
Height	87 mm