EasyManuals Logo
Home>Cisco>Server>UCS C240 M3

Cisco UCS C240 M3 Specifications

Cisco UCS C240 M3
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
Cisco UCS C240 M3 High-Density Rack Server (Small Form Factor Disk Drive Model)
76
SUPPLEMENTAL MATERIAL
Upgrade and Servicing-Related Parts
This section lists the upgrade and servicing-related parts you may need during the life of your server. Some
of these parts are configured with every server, and some may be ordered when needed or may be ordered
and kept on hand as spares for future use. See
Table 39.
Table 39 Upgrade and Servicing-related Parts for UCS C240 M3 SFF Server
Spare Product ID (PID) Description
N20-BBLKD=
2.5-inch HDD Blanking Panel
1
UCSC-CABLE2= Set of four spare SAS/SATA cables for C240 M3 SFF (2.5-in) containing a
16-drive backplane (with no backplane expander). Note that four cables are
required to connect up to 16 drives via two LSI SAS MegaRAID 9271-8i or
9271CV-8i cards.
UCSC-CABLE6= Set of two spare SAS/SATA cables for a C240 M3 SFF (2.5-in) containing a
24-drive backplane with SAS expander. Note that a maximum of two cables
are required to connect up to 24 drives via one LSI SAS MegaRAID 9271-8i or
9271CV-8i card.
UCSC-PCIF-01H= PCIe Low Profile blanking panel for UCS C-Series Server
UCSC-PCIF-01F= PCIe Full Height blanking panel for UCS C-Series Server
UCSC-HS-C240M3=
Heat Sink for UCS C240 M3 Rack Server
1
UCSC-AIRBAF-C240=
Air Baffle Replacement Kit for C240 M3 Server
1
N20-MBLIBATT=
Replacement Lithium Battery for Server Motherboard (CR2032)
1
UCS-RAID-BBU=
Battery Back-Up for 9266
2
UCS-RAID-CV-SC= LSI CacheVault Power Module for 9266CV-8i, 9271CV-8i, 9285CV-8e and
9286CV-8e
3
UCSC-PSU-BLKP= Power supply blanking panel/filler for C-Series Servers
UCSC-RAIL-2UB= Ball bearing rail kit for C240 rack servers
UCSC-CMA2B Reversible cable management arm for C240 ball bearing rail kit
UCSC-RAIL-2U= Friction Rail Kit for C240, C260 rack servers
UCSC-CMA2= Reversible Cable Management Arm for C240 & C260 friction rail kit
UCSC-RAIL-2U-I=
Inner rail spare for C240 and C260 friction rail kit
4
UCSC-SD-16G-C240=
16GB SD Card for C240 Servers
5
UCS-SD-16G=
Blank SD Card for UCS servers
6
UCS-USBFLSH-S-4GB= 4GB SLC Flash USB Drive (shorter) for all servers except C260
N20-BKVM=
KVM local IO cable for UCS servers console port
7
UCS-CPU-EP-PNP=
Pick n place CPU tools for M3/EP 10/8/6/4/2 core CPUs (Green)
8

Table of Contents

Other manuals for Cisco UCS C240 M3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco UCS C240 M3 and is the answer not in the manual?

Cisco UCS C240 M3 Specifications

General IconGeneral
Processor cores8
Processor modelE5-2600
Processor frequency2.7 GHz
Number of processors installed2
HDD size2.5 \
RAID supportYes
HDD interface-
Optical drive typeNo
Total storage capacity300 GB
Maximum storage capacity- TB
Number of HDDs installed16
Memory slots24
Internal memory96 GB
Memory clock speed1866 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory- GB
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
PCI Express x8 slots3
Chassis typeRack (2U)
Power supply650 W
Operating altitude0 - 3000 m
Non-operating altitude0 - 12000 m
Operating temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)5 - 93 %
Operating relative humidity (H-H)10 - 90 %
Harmonized System (HS) code84714100
Weight and Dimensions IconWeight and Dimensions
Depth712 mm
Width445 mm
Height87 mm

Related product manuals