Cisco Unified IP Phone 8941 - Page 115

DescriptionFeature
Allows a user to answer a call ringing on a phone in another group that is associated with the
user's group.
See the Cisco Unified Communications Manager Features and Services Guide , “Call Pickup”
chapter.
Other Group Pickup
Enables users to add pauses to speed-dial strings to reach destinations that require FAC, CMC,
dialing pauses, and additional digits.
See the Cisco Unified IP Phone 8941 and 8945 User Guide for Cisco Unified Communications
Manager (SCCP and SIP).
Pause in Speed Dial
Improves phone firmware downloads.
See Set Up Peer Firmware Sharing, on page 130.
Peer Firmware Sharing (PFS)
Enables the users to query the call queue statistics for hunt pilots and the information appears
on phone screen.
See Set Up Softkey Template, on page 117.
PLK Support for Queue Statistics
Allows the user to dial E.164 numbers prefixed with a plus (+) sign.
To dial the + sign, the user needs to press and hold the star (*) key for at least 1 second. This
applies to dialing the first digit for an on-hook (including edit mode) or off-hook call.
No configuration required.
Plus Dialing
Prevents users who share a line from adding themselves to a call and from viewing information
on their phone display about the call of the other user.
See:
• Cisco Unified Communications Manager Administration Guide, “Cisco Unified IP Phone
Configuration”
• Cisco Unified Communications Manager System Guide, “Cisco Unified IP Phone”
• Cisco Unified Communications Manager Features and Services Guide, “Barge and
Privacy”
Privacy
Enables the Cisco Unified Communications Manager administrator to configure a phone
number that the Cisco Unified IP Phone dials as soon as the handset goes off hook. This can
be useful for phones that are designated for calling emergency or “hotline” numbers.
See the Cisco Unified Communications Manager Administration Guide, “Directory Number
Configuration” chapter.
Private Line Automated Ringdown
(PLAR)
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
101
Telephony Features