Cisco Unified IP Phone 8941 - Cisco Unified Communications Manager Phone Setup; Determine the Phone MAC Address

CHAPTER 4
Cisco Unified Communications Manager Phone
Setup
•
Determine the Phone MAC Address, page 43
•
Set Up Cisco Unified IP Phone, page 44
•
Phone Addition Methods, page 47
•
Add Users to Cisco Unified Communications Manager, page 48
•
Add a User to an End User Group, page 50
•
Associate Phones with Users , page 51
•
Survivable Remote Site Telephony, page 51
•
Set Up Cisco Unified Communications Manager Features, page 54
Determine the Phone MAC Address
To add phones to Cisco Unified Communications Manager, you must determine the MAC address of a phone.
Procedure
Perform one of the following actions:
•
On the phone, press Applications , select Phone Information and look at the MAC Address field.
•
Look at the MAC label on the back of the phone.
•
Display the web page for the phone and click Device Information.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
43