Cisco Unified IP Phone 8941 - Set Device Authentication Field; Set EAP-MD5 Fields

To changeDescriptionOption
Display only. Cannot configure.State: Displays the state of 802.1x authentication:
•
Disconnected: Indicates that 802.1x
authentication is not configured on the
phone.
•
Authenticated: Indicates that the phone is
authenticated.
•
Held: Indicates that the authentication
process is in progress.
Protocol: Displays the EAP method that is used
for 802.1x authentication (can be EAP-FAST or
EAP-TLS).
Transaction Status
Set Device Authentication Field
Procedure
Step 1
Press Applications .
Step 2
Choose Admin settings > Security setup > 802.1X Authentication
Step 3
Set the Device Authentication option:
•
Yes
•
No
Step 4
Press Apply.
Set EAP-MD5 Fields
Procedure
Step 1
Press Applications .
Step 2
Choose Administrator Settings > Security Setup > 802.1X Authentication > EAP-MD5.
Step 3
To change the shared secret, choose Shared Secret.
Step 4
Enter the shared secret.
Step 5
Press Apply.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
78
Supported Security Features