Possible explanation and actionDescriptionMessage
None. This is an informational message indicating
the name of the configuration file for the phone.
Name of the configuration file.XmlDefault.cnf.xml,
or .cnf.xml
corresponding to the
phone device name
Display Network Statistics Window
To display the Network Statistics window, perform these steps:
Procedure
Step 1
Press Applications.
Step 2
Select Administrator Settings > Status > Network Statistics.
Step 3
To reset the Rx Frames, Tx Frames, and Rx Broadcasts statistics to 0, press Clear.
Step 4
To exit the Network Statistics screen, press Exit.
Network Statistics Fields
The following table describes the information in the Network Statistics screen.
Table 20: Network Statistics Fields for the Cisco Unified IP Phone 8941 and 8945
DescriptionItem
Number of packets sent by the phoneTx Frames
Number of broadcast packets sent by the phoneTx Broadcasts
Total number of unicast packets transmitted by the phoneTx Unicast
Number of packets received by the phoneRx Frames
Number of broadcast packets received by the phoneRx Broadcasts
Total number of unicast packets received by the phoneRx Unicast
Identifier of a device connected to this port discovered by CDP protocol.Neighbor Device ID:
•
Neighbor IP Address
•
Neighbor Port
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
146
Cisco Unified IP Phone Status
To Next Page
Loading...
