DescriptionFeature
Enables you to configure the RTCP authentication tag length for the secure video calls.
Configure the 80-bit SRTCP field from the Phone, Common Phone Profile, or Enterprise
Phone Configuration window in the Cisco Unified Communications Manager Administration.
See the Cisco Unified Communications Manager Administration Guide.
sRTP Secure Video
Allows the administrator to enable or disable the SSH Access setting using Cisco Unified CM
Administration.
This option indicates whether the phone supports the SSH Access.
Settings include:
•
Enabled: Enabling the SSH server allows the phone to accept the SSH connections.
•
Disabled (Default): Disabling the SSH server functionality of the phone blocks the SSH
access to the phone.
See Set Up SSH Access, on page 128.
SSH Access
Restricts access to specified telephony features by time period.
See:
• Cisco Unified Communications Manager Administration Guide, “Time Period
Configuration”
• Cisco Unified Communications Manager System Guide, “Time-of-Day Routing”
Time-of-Day Routing
Updates the Cisco Unified IP Phone with time zone changes.
See the Cisco Unified Communications Manager Administration Guide, “Date/Time Group
Configuration” chapter.
Time Zone Update
Allows users to redirect connected calls from their phones to another number.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer feature
implementation on the Cisco Unified IP Phone 8941 and 8945 and you may need to configure
the Join and Direct Transfer Policy to disable join and direct transfer on the same line or
possibly across lines.
Transfer
Transfer: The first invocation of Transfer initiates a new call using the same directory number,
after putting the active call on hold.
Direct Transfer: This transfer joins two established calls (call is in hold or in connected state)
into one call and drops the feature initiator from the call. Direct Transfer does not initiate a
consultation call and does not put the active call on hold.
Some JTAPI/TAPI applications are not compatible with the Join and Direct Transfer feature
implementation on the Cisco Unified IP Phone 8941 and 8945 and you may need to configure
the Join and Direct Transfer Policy to disable join and direct transfer on the same line or
possibly across lines.
See the Cisco Unified Communications Manager System Guide, “Understanding Directory
Numbers” chapter.
Transfer - Direct Transfer
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
and SIP)
105
Telephony Features
To Next Page
Loading...
