Cisco VG410 - Site Log

• Phillips screwdriver for attaching the brackets to the voice gateway.
• Mounting brackets and screws for the 19 or the 23 inches rack, if required.
• Four telco machine screws, for installing the chassis in a rack (use the screw size required by the rack).
• An ESD-preventive wrist strap.
• A modem for remote configuration.
In addition, you might also need the following external equipment:
• A Console terminal or PC with terminal emulation software
• A PC running terminal emulation software for administrative access
• A modem for remote access
• Analog voice RJ-21 and RJ-11 cables
• An ethernet switch
Site Log
We recommend that you maintain a site log to record all actions relevant to the system. A site log typically
includes:
• Installation - Print a copy of the installation checklist and insert it into the site log.
• Upgrades and maintenance - Use the site log to record ongoing maintenance and expansion history.
Update the site log to reflect the following:
• Configuration changes
• Maintenance schedules, requirements, and procedures performed
• Comments, notes, and problems
• Changes and updates to Cisco IOS software
Cisco VG410 Voice Gateway Hardware Intallation Guide
17
Planning the Installation
Site Log