CHAPTER 3
Installing the Cisco VG410 Voice Gateway
This chapter provides the prerequisites and the procedure for installing the Cisco VG410 Voice Gateway in
an equipment rack.
• Prerequisites for the Installation, on page 19
• Unpack the Device, on page 20
• Mounting the Voice Gateway in Rack, on page 20
• Setting the Chassis on a Desktop, on page 23
• Chassis Grounding, on page 25
Prerequisites for the Installation
Before installing the device, read the safety warnings and gather the required tools and equipment. For more
information about the required tools and equipment, see the Tools and Equipment section in this hardware
installation guide.
Safety Recommendations
Statement 407—Japanese Safety Instruction
You are strongly advised to read the safety instruction before using the product.
https://www.cisco.com/web/JP/techdoc/pldoc/pldoc.html
When installing the product, use the provided or designated connection cables/power cables/AC adapters.
Note
Cisco VG410 Voice Gateway Hardware Intallation Guide
19
To Next Page
Loading...
