CT-S310II Series Service Manual
- 24 -
(3) Both ends of the shaft at “SA CUTTER UNIT” (projections)
<Daphne Eponex Grease No. 2>
Right/left cutting edges of the blade at “SA, CUTTER UNIT”
(Amount of grease: 1-mm drop/point)
Right and left ends of the fixed blade at “PLATE, FIXED BLADE”
(Amount of grease: 1-mm drop/point)
Apply grease to the portion
that is right under the rib.
Apply grease to the portion
that is right under the rib.
To Next Page
Loading...
