CT-S310II Series Service Manual
- 15 -
1-2-2. Disassembling “UNIT, MECHANISM”
1. Disassembling “LEVER, INTERLOCK SENSOR-03”
Detach “SPRING, LEVER INTERLOCK” from the hook at “FRAME, MAIN-03”.
Remove “SHAFT, LEVER” that secures “FRAME, MAIN-03” and “LEVER, INTERLOCK SENSOR”.
2. Disassembling “HOLDER, PAPER-03”
Contract “SPRING, POP UP-03” and remove it toward you.
Move down “POP UP, COVER”, align the lugs on the right and left with the notches at “FRAME,
MAIN-03”, and pull it out toward you.
Remove one “SCREW, BHT (BT), M3.0 6” that fastens “FRAME, MAIN-03” and “HOLDER,
PAPER-03” from the right and left sides. Remove one “SCREW, BHT (ST), M3.0 6” that fastens
“BASE, HEAD” from the right and left sides.
SHAFT, LEVER
SPRING, LEVER INTERLOCK
SPRING, POP UP-03
Align the lugs with the notches
and pull out "POP UP, COVER".
POP UP, COVER
SCREW, BHT (BT), M3.0 6
SCREW, BHT (ST), M3.0 6
To Next Page
Loading...
