CT-S310II Series Service Manual
- 5 -
1-2. Disassembly Procedure
1-2-1. Disassembling the Printer
1. Disassembling “COVER, FRONT-03”
Put your fingers into the indentation on the front and raise “COVER, FRONT-03” to remove it.
<Precaution at disassembl
y / reassembly>
When mounting or removing “COVER, FRONT-03”, be
careful not to touch the manual cutter.
If it cannot be removed easily, open “COVER, TOP-03”
beforehand.
2. Disassembling “COVER, TOP-03”
Pull “LEVER, COVER OPEN-03” to open “COVER, TOP-03”.
“COVER, TOP-03” is inserted in slots on the right and left of “CASE-03”.
Pull the right and left panels of “COVER, TOP-03” outwardly while raising “COVER, TOP-03”.
COVER, FRONT-03
Remove the cover being careful not to touch the
manual cutter blade.
LEVER, COVER OPEN-03
COVER, TOP-03
To Next Page
Loading...
