Citizen COMPACT CT-S310II

CT-S310II Series Service Manual
- 6 -
Remove two “SCREW, BHT (PT), M3.0  10” and remove “HOLDER, PLATEN-03” from “COVER,
TOP-03”.
<Precaution at reassembly>
When reassembling “HOLDER, PLATEN-03”, align the holes on “HOLDER, PLATEN-03” with the bosses at
the right and left of “COVER, TOP-03”.
3. Disassembling “HOLDER, PLATEN-03”
Remove two “SCREW, PHT (ST, SW + PW) M3.0  6” that fasten “UNIT, SLIDE BLADE” and remove
“GUIDE 3, PAPER” from “HOLDER, PLATEN-03”.
<Precaution at reassembly>
When reassembling, align “GUIDE 3, PAPER” with bosses at “HOLDER, PLATEN”.
Keep the chamfered side of “UNIT, SLIDE BLADE” at the left so that the mark at “HOLDER, PLATEN” can be
seen.
HOLDER, PLATEN-03
SCREW, BHT (PT), M3.0  10
Bosses
HOLDER, PLATEN-03
SCREW, PHT (ST, SW + PW), M3.0  6
GUIDE 3, PAPER
Bosses