Citizen COMPACT CT-S310II

CT-S310II Series Service Manual
- 23 -
1-4. Oiling
1) Oil Used (Grease)
 FLOIL G311S (Kanto Kasei)
 Daphne Eponex Grease No. 2 (Idemitsu)
2) Oiling Positions
<FLOIL G311S>
(1) Shaft at “COVER GEAR”
(2) Rotating center holes and press-formed projections at “LEVER R & L, CUTTER
RELEASE”
Rotating center holes and press-formed projections and hook at “LEVER R & L, PLATEN
LOCK”
Hook holes at “FRAME, MAIN” (mating section with “LEVER R & L, PLATEN LOCK”)
Hooks at “FRAME, MAIN” (mating section with “LEVER R & L, CUTTER RELEASE”)
Press-formed projections at “FRAME, MAIN”
Apply grease to the shaft.
Inside of the hook at “LEVER L, PLATEN LOCK”
Internal press-formed projections at “LEVER L, PLATEN LOCK”
Rotating center hole
Hooks inside “FRAME, MAIN”
Rotating shaft
External press-formed projections
at “FRAME, MAIN”
Inside of the hook at “LEVER R,
PLATEN LOCK”
Rotating center
hole
Internal Press-formed projections at
“LEVER R, CUTTER RELEASE”
Internal press-formed projections at “LEVER R, PLATEN LOCK”