CT-S310II Series Service Manual
(2) Cutter lock error
Description: The cutter cannot be moved. An error has occurred.
The buzzer beeps.
*1
Recovery condition: Recovered when the FEED switch is pressed or the DLE ENQ 1 or 2
command is given.
POWER LED (green) ERROR LED (red)
Lit
Blinks twice at short
intervals, and blinks once at
long intervals, repeatedly.
3) Unrecoverable errors
(1) Memory error
Description: Built-in RAM read/write check operation is not correctly performed.
Recovery condition: This error is not recoverable.
POWER LED (green) ERROR LED (red)
Not lit
Blinks at short intervals.
(2) Low voltage error
Description: The voltage supplied to the printer or the drawer voltage drops.
When this error occurs, immediately turn the power off.
Recovery condition: This error is not recoverable.
POWER LED (green) ERROR LED (red)
Lit
Blinks three times at short
intervals, and blinks once at
long intervals, repeatedly.
- 27 -
To Next Page
Loading...
