CT-S310II Series Service Manual
(2) Cover open
Description: When the printer cover is opened in the standby status, the ERROR LED
blinks.
The buzzer beeps.
*1
Recovery condition: Recovered when the printer cover is closed.
POWER LED (green) ERROR LED (red)
Lit Lit
Note: When the cover is opened with the paper set, the paper sensor may be activated, resulting in a
paper end error.
(3) Macro execution wait
Description: When the ESC/POS command is specified, the macro execution wait status
will take effect.
Recovery condition: Recovered when the FEED switch is pressed.
POWER LED (green) ERROR LED (red)
Lit
Blinks at long intervals,
repeatedly.
(4) Power saving mode
Description:
Recovery condition: Recovered when data is received, the sensor is activated, or the FEED
switch is pressed.
POWER LED (green) ERROR LED (red)
Decreases the brightness
and modulates it slowly.
Decreases the brightness
and keeps the indication in
the state before standby.
- 29 -
To Next Page
Loading...
