36 37
English
Operating Instructions
E82*
Adjust to reference or 0-positions.4.
(1) With the crown pulled out two ‘steps’ to position 2, adjust the 24-hour hand, hour
hand, minute hand, and second hand.
(2) Next, adjust the function hand and date with the crown in position 1.
(3) Press the crown to the normal position. The All-reset and reference or 0-position
adjustment is complete.
Note:
Take care to perform operations correctly as the watch will not function if the crown
is returned to the normal position before adjustment is complete.
If this happens, you must repeat the all-reset operation and reset the reference or
0-positions.
To Next Page
Loading...
Need help?
General
