All-Reset Operation7.
If subjected to static electricity or strong shock, the watch may cease to operate
correctly.
In such cases, perform the all-reset and adjust the reference or 0-positions.
<Correcting the Reference or 0-Positions of the 24-hour Hand, Hour Hand
and Minute Hand>
Press and release the upper right button button (A) to correct the reference or 0-positions of the 1.
24-hour hand, hour hand and minute hand.
Rotate the crown one click at a time to adjust the 24-hour hand, hour hand and minute hand.2.
(1) Rotate the crown to the right 1 click to move the hour hand and minute hand clockwise.
(2) Rotate the crown to the left (counterclockwise) 1 click to move the hour hand and minute hand
counterclockwise.
Quickly rotate the crown 2 or more clicks consecutively to advance the hands rapidly. Rotate the •
crown to the left or right by 1 click to stop rapid advance.
<Correcting the Reference or 0-Position of the Second Hand>
Press and release the upper right button (A) to correct the reference or 0-position of the second 1.
hand.
(1) Rotate the crown to the right 1 ‘click’ to move the second hand 1 step at a time.
(2) Quickly rotate the crown 2 or more ‘clicks’ consecutively to advance the second hand rapidly.
Rotate the crown 1 ‘click’ at a time to adjust so the second hand stops just before the 12:00
position.
Return the crown to its normal position to complete the correction.•
Note:
The second hand cannot be moved in the reverse direction.
(2)
(A)
Correcting the
reference position
(B)
Normal position
To Next Page
Loading...
Need help?
General
