Citizen E820 - Low Power Mode Operations

62
<Low Power Warning>
Regardless what mode the watch is in, if the power becomes very low, the watch will switch
to the time display and the second hand will move to the ‘CHARGE’ position indicating that
recharging is necessary.
Aer the second hand has moved to the ‘CHARGE’ position, the watch will switch to display the
time in the following sequence, 24-hour hand, hour hand, minute hand, date (function hand).
Although the watch is functioning properly in this low charge state, it will stop within
approximately 11 days (approximately 2 days if the display switches from charge warning
operations to time change movement).
Restore the 1-second interval movement of the second hand by exposing the watch to light
sucient for charging.
If the watch stops due to insucient charge, be sure to fully charge
it, perform the all reset and 0-positioning procedure and then re-
set the time as well as the calendar.
Note, during low power:
• e chronograph will stop, even during measurement, and reset.
• e time set for local time (time dierence) is maintained.
• e alarm sound will not be emitted even if the alarm has been set.
• Crown (changing modes) and button operations will not
function.