Citizen E820 - Time Setting Warning Functionality

63
<Time setting warning function>
As the watch is exposed to light sufficient for charging and begins re-charging after it has
stopped, the second hand will move to the “SET” position, informing you that the time is
incorrect and must be set.
Although movement of the 24-hour hand, hour hand, and minute hand will start after the
second hand has moved to the “SET” position, the time and calendar must be set aer the watch
has fully charged.
Note: When the time setting warning function is enabled.
• Crown and button operations other than those used to set the time and calendar will not function.
• e time setting warning function is cancelled when the crown is pulled out to position 2 (time
correction position) while in time/calendar mode. e second hand will stop at the SET position
unless the time is set aer pulling the crown out to position 2.
• If the watch has stopped due to an insucient charge, expose the
watch to light sucient for charging until the display switches to
the time setting warning indication (SET position) (30 minutes
or more).
<Overcharging prevention function>
Once the rechargeable cell is fully charged, an overcharging
prevention function will activate so that it is not charged any further.