Citizen E820 - 6. Checking and Correcting Hand Reference Positions; How to Check Hand Reference Positions

77
6. Checking and Correcting the Reference or
0-Position of Each Hand
Before using this watch, be sure to check that the functions of the watch all
operate correctly.
What is a Reference or 0-Position?
The term “reference or 0-position” refers to those hand and date positions
used as a datum point for the correct operation of the watch.
[Checking the Reference or 0-Position]
1. With the crown pulled out one step to position 1, rotate the crown to align the
mode hand with chronograph [CHR] mode as indicated on the mode subdial.
2. e 24-hour hand, hour hand, minute hand, second hand, function hand,
and date will rapidly advance and then stop at the reference position
recorded in the watch memory.
3. Conrm that they are showing the correct reference or 0-positions.