Citizen E820 - Turning the Alarm ON;OFF; Alarm Sound Check; Stopping the Alarm Sound

76
3. Rotate the crown to adjust the time to when the alarm should sound.
(1) Rotate the crown to the right (clockwise) 1 click to move the hour hand and minute hand
clockwise.
(2) Rotate the crown to the le 1 ‘click’ to move the hour hand and minute hand
counterclockwise.
• Quickly Rotate the crown 2 or more clicks consecutively to advance the hands rapidly. Rotate
the crown to the le or right by 1 click to stop rapid advance.
Note
• Make sure to correctly set the alarm time in terms of AM/PM, using the 24-hour hand as a
guide.
4. Aer the alarm time has been set, return the crown two steps to its normal position. is
completes setting the alarm.
[Turning the Alarm ON/OFF]
Press and release the upper right button (B) in alarm mode while the crown is in position 2
turns the alarm ON/OFF each time the upper right button (B) is pressed.
[Alarm Sound Check]
Press and hold the upper right button (B) in alarm mode while the crown is in its normal
position emits the alarm sound while the button is pressed.
[Stopping the Alarm Sound]
e alarm is emitted for 15 seconds when the crown is in its normal position. Press and release
either the upper or lower right button (A) or (B) to stop the alarm sound.