2 Web Manager
37
4-4-4. CONFIG>>Maintenance Tab
・ Save & Restart button
Save changes, and restart the Interface board.
・ Restart button
Restart the Interface board without saving changes.
・ Factory Default button
Return the Interface board to the factory default settings.
・ Firmware Upgrade button
Upgrade the firmware of the Interface board.
Firmware upgrade
1) Click “Browse”, and select the firmware file.
2) Click “Write”.
Warning
After the firmware upgrade starts, do not disconnect power or transmission to the printer until the
upgrade is complete.
To Next Page
Loading...
Need help?
General
