4 NetToolK
42
③ ”Help” menu
Select ”Help” – ”About” to display the version information of the NetToolK.
④ ”Refresh List” button
Refresh the list of the LAN interface board. The application periodically refreshes the list, but
you can refresh the list manually by clicking this button.
⑤ ”Go to Web Page” button
Select the LAN interface board you want to configure, and then click “Go to Web Page”. The
browser starts and displays the Web manager.
⑥ ”Configure the LAN Board” button
Select the LAN interface board you want to configure, and then click “Configure the LAN
Board”. See 5-3 Setup Window (page 43).
⑦ LAN interface board list
The list displays the LAN interface boards connected to the network. The LAN interface boards
connected to the same subnet are displayed.
To Next Page
Loading...
Need help?
General
