120
INJECTION
CHECKS : TURBO PRESSURE
Engine : 8HT
Mode of operation
Position tool [1] in the vehicle.
Start the engine.
Engage first gear, start the vehicle.
Engage the gears up to third gear.
Decelerate to an engine speed of 1000 rpm.
Check the pressure : 0,6 ± 0,05 bar (1500 rpm).
Accelerate freely (change from fourth gear to third gear)
Check the pressure: 0,9 ± 0,05 bar (between 2500 and 3500 rpm).
Remove tools [1], [2].
Reposition the tube (2)
Tighten the clips (1).
NOTE : Confirm the measurement with the aid of the diagnostic tool (parameter measures).
Parameter measures (diagnostic tool)
Checks on the inlet manifold pressure sensor
Remove the engine cover.
(4) inlet manifold pressure sensor
B1B2008D
C5F2002D
To Next Page
Loading...
