AXLES
SUSPENSION
STEERING
158
Front axle
Anti-roll bars
Engines all types : 22 mm
Travel stop
Travel stop height A : 96 mm.
Rear axle
Rear axle crossmember
Machine-welded rear axle, of trailing arm type with deformable axle crossmember.
Engines all types : 5,5 mm
Suspension spring
During a repair on a suspension spring.
IMPERATIVE : Check the presence and condition of the rubber protections on the fixed
and sliding cups of the spring compressor.
IMPERATIVE: Do not put a suspension spring in direct contact with a metallic object or
tool.
IMPERATIVE: Check the condition of the suspension springs (absence of signs of
impacts, scratches or rust spots). The paint coating on the suspension springs should
not be damaged, no bare metal.
B3C200VD
SUSPENSION SPECIFICATIONS
To Next Page
Loading...
