15
GENERAL
GENERAL SPECIFICATION : LIFTING AND SUPPORTING THE VEHICLE
Note on use of a platform lift
Respect the safety requirements set out in the user instructions.
Use blocks for a platform lift.
B : lift with moving arms.
C : platform lift.
"a" rubber block
Dimensions of block D :
"e" : 85 mm
"f" : 70 mm
"g" : 200 mm
"h" : 100 mm
Use the following table in order to position the vehicle correctly
Right/left adjustment Place the vehicle in the middle of the lift
Align the bottom of the blocks on the extreme edges of the platform rubber
Front/rear adjustment «i» and «j»
Align the top of the blocks on one of the blocks «k» on the front jacking point lug.
Raise the vehicle just off the ground and check that it is stable.
E2A2002D
Lifting and supporting the vehicle
To Next Page
Loading...
