CITROEN C1 - Front Axle

AXLES
SUSPENSION
STEERING
154
Subframe
(1) subframe.
(2) suspension arm.
Subframe in two steel shells, fixed by means of six screws on the body, with a yoke for the
lower engine suspension rod and lateral yokes (2 LH + 2 RH) for the suspension arm fixings.
The two rear fixing points for the subframe, under the floorpan, are via two link brackets
(LH/RH) welded on the subframe.
Pivot.
Pivot type : "pinched".
Pivot bearing diameter : 69 mm
Bearing with double row of balls, with integral magnetic wheel
Suspension leg
Front suspension with independent wheels, type pseudo : "Mac Pherson".
Travel stop : height A96 mm.
Anti-roll bar
All engine types : Ø 22 mm
B3C200UD
B3C200VD
SPECIFICATIONS : FRONT AXLE
FR-C1-page149-165-2005 9/01/06 8:56 Page 154