CLUTCH
GEARBOX
TRANSMISSION
129
CHECKING AND ADJUSTING THE CLUTCH PEDAL TRAVEL
Move aside the floor carpet.
"a" : Pedal height adjustment point.
Height A of the pedal in relation to the floor : between 135 and 145 mm.
Adjust the height A of the pedal.
Slacken the locking nut and turn the stop screw until you obtain the correct height.
Tighten the locking nut.
Tightening torque : 2,5 ± 0,2 m.daN.
Press on the pedal until you feel the start of resistance.
Play B in the pedal : 18 to 28 mm.
B2B2000D
B2B2001D
To Next Page
Loading...
