48
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Tools.
[1] Compression lever for dynamic tensioner : (-).0194.E3
[2] Peg for dynamic tensioner roller : (-).0194.F
References on the dynamic tensioner roller
"b" Nominal position.
"a" Position for "maximum wear" of the auxiliary drive belt.
Removing.
Disconnect the battery negative cable.
Raise and support the vehicle, wheels hanging.
Lock the front wheels on full RH lock.
Move aside the splash-shield.
IMPERATIVE : In the case of belt re-use, mark the direction of rotation of the belt. If the index
on the tensioner roller is outside the marks, change the auxiliary equipment drive belt.
A:Vehicle with air conditioning
B : Vehicle without air conditioning
1 and 4 Alternator pulley.
3 and 6 Auxiliary drive belt pulley.
5 Guide roller.
2 Aircon compresseur pulley
B1E200AD
Engine : 8HT
B1B2010D
To Next Page
Loading...
