144
CLUTCH
GEARBOX
TRANSMISSION
SPECIFICATIONS OF MMT (TOYOTA) PILOTED MANUAL GEARBOX
"b" Selection.
"c" Engagement.
Features
IMPERATIVE : Perform an initialisation of the gearbox actuator after refitting (see corresponding
operation).
(37) Gear engagement screw.
"d" Neutral.
"e" 1st, 3rd, 5th.
"f" 2nd, 4th, Reverse.
IMPERATIVE : Before refitting a gearbox actuator, check that it is in "neutral" position.
Piloted manual gearbox ECU
The gearbox ECU decides on the changing of gear.
It is located in the vehicle dashboard on the front LH side.
B2C201PD
B2C201QD
To Next Page
Loading...
