124
ENGINE
AUXILIARY EQUIPMENT DRIVE BELT
Engine: KFU
B1BP10XC
Vehicle With air conditioning.
Removing.
Slacken the tension, screw (6), screw (4) and screw (5).
Completely detension the belt by acting on the tensioner roller.
Remove the auxiliary equipment drive belt.
Refitting.
Refit the auxiliary equipment drive belt.
Respect the following sequence :
- Crankshaft pinion, aircon compressor pulley, alternator pulley guide roller and guide roller.
- Position tool
[2] on the belt. Tighten the screw (5) to tension the belt to
120 ± 3 SEEM units.
Tighten screw (4), screw (6).
Remove tool [2].
Complete the refitting in the opposite order to removal.
B1BP10VC
C3
To Next Page
Loading...
