ENGINE
173
CHECKING AND SETTING THE VALVE TIMING
Engines: 6FZ - RFN 2003 #
Checking the setting of the timing (continued).
A:
Pegging on the manual gearbox.
B: Pegging on the automatic gearbox.
Turn the engine by means of the crankshaft pinion screw, to bring it to the pegging position.
Peg the crankshaft, using tool
[2].
Peg the camshaft pulleys, using tool [3].
NOTE: The pegs [3] should go in without effort.
WARNING: If the pegs go in only with difficulty, repeat the operation for fitting and
tensioning the timing belt (see corresponding operation).
Refitting.
Remove tools [2] and [3].
Complete the refitting in reverse order to removal.
B1BP2V3D
B1EP1BAC
XSARA - XSARA PICASSO
To Next Page
