CITROEN C2 2004 - Page 216

212
ENGINE
CHECKING AND SETTING THE VALVE TIMING
Engine: WJY
B1BP2FTC
Setting the timing.
Removing.
- Disconnect the battery.
- Remove the front RH lower splash-shield, using tool [1].
- Remove the accessories drive belt (see corresponding operation).
- Uncouple and plug the diesel fuel delivery and return hoses.
- Support the engine, using a workshop hoist.
- Remove the RH engine support.
- Engage 5th gear to permit rotation of the engine.
- Remove the upper cover
(1).
- Remove the intermediate cover (2).
- Remove the lower cover (3).
WARNING: Refit the screw (4) equipped with a washer (5 mm thick).
- Rotate the front RH wheel to drive the engine in its normal direction of
rotation.
- Bring the camshaft drive and injection pump pinions to their setting points.
- Position the peg
[2] (from underneath the vehicle).
- Continue turning the engine until the peg [2] engages in the flywheel.
B1BP30BC
XSARA