323
CLUTCH
GEARBOX
TRANSMISSION
CHECKS AND ADJUSTMENTS: MA/5 GEARBOX CONTROLS
Engines: HFX - KFV - KFU - NFU - 8HX - 8HW
Adjustment.
WARNING: Do not use any tool to detach the ball-joints.
The gear selection control and gear engagement control
cables cannot be adjusted.
To unlock the ball-joint, press at «a» then pull the ball-joint
upwards.
To release the sleeve stops, pull the needles
«b», in the
direction of the arrow, then disengage the sleeve stops from
their supports.
B2CP3J1D
B2CP3J0D
C2 - C3 - C3 PLURIEL
To Next Page
Loading...
