346
CLUTCH
GEARBOX
TRANSMISSION
XSARA
AL4 AUTOMATIC GEARBOX
Engines: NFU - RFN - RHZ
SHIFT LOCK.
NOTE:
The «shift lock» is a system that locks the gear selection lever in position «P».
U
nlocking the «SHIFT LOCK» (normal operation).
- Switch on the ignition.
- Press the brake pedal and keep it pressed.
- Move the gear selection lever out of position «P».
Unlocking the «SHIFT LOCK» (with an operating fault).
NOTE: It is impossible to unlock the «shift lock» with the «Normal operation» method.
The fault may originate from one of the following components:
- «Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove:
- The cover
(1).
- Unlock the «shift lock» (2) with the aid of a screwdriver.
- Move the gear selection lever out of position «P».
C5FP06ZC
C5FP06YC