347
CLUTCH
GEARBOX
TRANSMISSION
AL4 AUTOMATIC GEARBOX
SHIFT LOCK.
NOTE:
The «shift lock» is a system that locks the gear selection lever in position «P».
Unlocking the «SHIFT LOCK» (normal operation).
- Switch on the ignition.
- Press the brake pedal and keep it pressed.
- Move the gear selection lever out of position
«P».
Unlocking the «SHIFT LOCK» (with an operating fault).
NOTE: It is impossible to unlock the «shift lock» with the «Normal operation» method.
The fault may originate from one of the following components:
-
«Shift lock».
- Gear lever position switch.
- Automatic gearbox ECU.
- Electrical harnesses.
- Battery voltage.
Remove:
- Unlock the
«shift lock» by pressing at «a» with a screwdriver placed in the gear selection
control gate.
- Move the gear selection lever out of position
«P».
Engine: RFN
XSARA PICASSO
B2CP3N8C