CITROEN C2 2004 - Page 94

90
ENGINE
SPECIAL FEATURES - TIGHTENING TORQUES (m.daN )
CYLINDER HEAD (mm)
Engine types 6FZ RFN RFS WJY RHY RHZ
Maximum permissible bow 0,05 0,03
Gasket surface regrinding - 0,30 - 0,20 - 0,40
TIGHTENING TORQUES ( m.daN)
Pre-tightening (1) Ø 11 : 1 ± 0,1 2 ± 0,1 2,5 ± 0,3
(2) Ø 6 : 1 ± 0,1
Slackening Ø 11 (only)
Tightening Ø 11 to 1 ± 0,1 8,5 ± 0,8 7 ± 0,7
Crankshaft then to 2 ± 0,1
bearing screws Tightening Angular Ø 11 at 70° ± 5° 60° ± 6° 60° ± 6°
Tightening Ø 6 to 1 ± 0,1
Pre-tightening 1 ± 0,1 4 ± 0,4 2 ± 0,2
Connecting Slackening 180° (1/2 turn)
rod screws Tightening 2,3 ± 0,2 2,3 ± 0,2 2± 0,2
Angular tightening 46° ± 5° 46° ±4,6° 70° ± 7° 70° ± 7°
XSARA - XSARA PICASSO