CITROEN C4 PICASSO - Page 173

171
4
Driving
C4-Picasso-II_en_Chap04_conduite_ed01-2016
Modification of the inter-vehicle distance setting
Threepredefinedinter-vehicledistancesettings
areoffered:
- "Distant"(3dashes),
- "Normal" (2 dashes),
- "Close"(1dash).
Enginerunningandcruisecontrolselected
(grey),youcanmodifytheinter-vehicle
distancesetting:
F press button 6 to display the selection
screen for inter-vehicle distance,
F press button 6repeatedlytocyclethrough
thepredefinedsettings.
The selection screen closes after a few
seconds.
Themodificationisthentakenintoaccount.
Thissettingremainsinmemory,whateverthe
stateofthesystemandwhentheignitionis
switchedoff.
Itispossibletoexceedthespeedsetting
temporarilybydepressingtheaccelerator
pedal.
Thecruisecontrolnolongermanagesthe
brakingsystemduringthisperiod.
Simply release the accelerator pedal to return
totheprogrammedspeed.
Iftheprogrammedspeedsettingisexceeded,
thedisplayofthespeedsettingdisappears
andamessage"Cruisecontrolsuspended"
is displayed until the accelerator pedal is
released.
Exceeding the programmed
setting