CKD SHD3025 - Page 14

<SM-13024-A>
12
１４
.
Dew point alarm value
(
A difference with the dew point
to which energy saving goes out is shown.
)
7℃
difference
１５
.
Factoryset
(Donttouch)
１６
.
１７
.
１８
.
１９
.
Timenottotakeoutadewpointalarmoutput  12hours
⑤ SinceadisplaychangesfromNo1toNo19wheneveritpushestheECOMODEbuttonevery1
time,changetotheitemwhichmakesasettingchange.
⑥ Sincethenumberofblinkincreasesonebyone,thenextof"9"issetto"0"anditcomesto
increaseagainbypushingtheSTARTbuttononce,changetothenumberofhope.
⑦ PushtheSTOPbutton,whenyouchangethebeamofblinknumber.Wheneveritpushes,central
numberandrightnumberblinkbyturns.Thenumberwhichblinkedcanbechangedlike ⑤.
⑧ Ifitissetasthenumericalvalueofhope,ECOMODEbuttonisrepeatedandpushedagain,and
returntoadewpointdisplay.Asetupisanendabove.
⑨ PushandreboottheSTARTbutton.
2) Setupofa dewpointalarmvaluesetsupdifferencewiththedewpointtowhichenergysaving
goesout.(ThedewpointsetupinNo.1,3,5and7)
(Example: 「42-7=35」-35℃ becomesasettingvalueatthetimeof40℃ setup.Ifdewpointalarm
valuesetupischanged,setupofalleachenergysavingdewpointwillchangesimultaneously.
3) Dont change the parameter of factory set by any means. Once intercepting a power supply
completelyatthetimesatthetimeofchangingaccidentallyetc.Supplypowersupply,pushingthe
STOPbuttonandtheSTARTbuttonsimultaneously.Anallclearanceiscarriedoutanditreturns
tothesamestateasthetimeofpurchase.