Clack WS1TC - User Manual

Water Specialist
1” Control Valve Series Model: WS1TC
1.25” Control Valve Series Model: WS1.25TC
Operation and Instruction Manual for OEM Only.
Please Note: This operation and instruction manual is for the training of
the OEM and for the OEM to use to train their customers. This document
is not to be used as the complete system manual.

Clack WS1TC Specifications

General

Service Flow Rate (17 psi drop)	21 GPM
Inlet/Outlet	1" NPT
Distributor Pilot	1.05" OD
Operating Pressure	20 - 125 psi
Meter Accuracy	±5%
Turbine Meter	Yes
Number of Programs	1
Mounting	Top Mount
Drain Line	1/2" NPT
Brine Line	3/8"
Mounting Base	2-1/2" - 8 NPSM
Operating Temperature	40 - 110° F
Type	Electronic
Voltage	120V AC
Switch Type	Micro Switch

Summary

Water Specialist Control Valve Overview

Model Identification

Identifies the 1" WS1TC and 1.25" WS1.25TC control valve series.

Control Valve Operation and Settings

Manual Regeneration Procedure

Steps to initiate manual regeneration immediately or for tonight.

Setting Time of Day and Regeneration

Manual Regeneration and Time Setting

Initiating Manual Regeneration

Steps to initiate manual regeneration at delayed or immediate times.

Setting Time of Day and Error Messages

Control Valve Programming: OEM System Setup

OEM System Setup Steps

Detailed steps for OEM system setup, including program selection.

Control Valve Programming: Advanced OEM Setup

OEM Setup for Regeneration Scheduling and Options

Steps for setting regeneration days, Hz, and differential pressure switch options.

Control Valve Programming: Installer Settings

Installer Settings: Days Between Regeneration

Installer Settings: 7-Day Regeneration Schedule