Remove the DCP
The control panel can be detached to prevent
theft. When detaching the control panel, keep
it in the safety place and prevent scratches.
We
recommend
taking
the
DCP
(DETACHABLE CONTROL PANEL) with you
when leaving the car.
1.
Press the [SRC I (!) ] button (2 sec.) to turn
off the power.
2.
Deeply push in [OPEN] button to unlock
the DCP.
3.
Hold
the
side
popped
out,
remove
the
DCP.
Attach the DCP
1.
Hold the DCP and ensure that the panel
faces towards you. Set the right side of the
DCP into the DCP bracket.
2.
Press the left side of the DCP until it locks.
A CAUTION
• The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it
or
subject it to strong shocks.
• Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DCP
to fall.
• The connector for the main unit and DCP is extremely important. Be careful not to damage it
by pressing on it with fingernails, screwdrivers, etc.
Note:
If the DCP is dirty, wipe off the dirt with a soft, dry cloth only.
CZ101
6
To Next Page
Loading...
Need help?
General
