MP3 Operations
Do not remove the memory card when
the panel is not fully flipped as this may
damage the memory card as well as the
unit. Remove the card only when it is fully
flipped.
Do not drop the memory card into the space
of the flipped down panel.
CAUTION
!
Listening to a memory card already
loaded in the unit
Press the
[
SRC
]
button to select the SD mode.
“ ” indicator will light on.
When the unit enters the SD mode, play starts
automatically.
∗
If there is no memory card loaded, the indication
“NO CARD” appears in the display.
∗
If there is no MP3 file is detected, the indication
“NO MP3” appears in the display.
∗
The mode changes each time the
[
SRC
]
button is
presssed.
Pausing play
1. Push the
[
]
knob to pause play.
“ ” appears in the display.
2. To resume track play, push the
[
]
knob again. “ ” appears in the display.
Display titles
This unit can display title data for the memory
card.
1. Press the
[
DISP
]
button to display current title
type.
2. To select the next type, press the
[
DISP
]
button
again.
The arrangement is shown below.
3. Relevant information will be displayed after
showing the title type.
Notes:
If no Artist information, “NO ARTIST” will be dis-
played.
If a MP3 file encode with ID3 TAG header but not
consist of any TAG information, “
unknown” will be
displayed and change according to the following
display:
- If no Album information, the folder name will be
displayed.
- If no Title information, the filename will be dis
-
played.
To Next Page
Loading...
Need help?
FM Tuner
Audio
