To Next PageTo Next PageWhat to do if Clarion Car Video System sound skips or is noisy?
If your Clarion Car Video System sound skips or is noisy, the disc may be dirty. Clean it with a soft cloth. If the disc is heavily scratched or warped, replace it with a disc in good condition.
What to do if Clarion Car Video System disc cannot play with the display “PARENTAL VIOLATION” shown?
If your Clarion Car Video System displays 'PARENTAL VIOLATION' and the disc won't play, the feature exceeds the set parental level. Release the view limitation or change the parental level. See the subsection “Setting up the parental level”.
What to do if buttons are not working on my Clarion Car Video System?
If nothing happens when you press the buttons on your Clarion Car Video System and the display is not accurate, the microprocessor may have malfunctioned. Press the reset button with a thin rod. Keep in mind that this will clear stored radio frequencies and titles.
Why my Clarion Car Video System disc cannot be loaded?
If your Clarion Car Video System won't load a disc, it's possible that a disc is already loaded. Eject the current disc before trying to load a new one. Alternatively, there might be foreign matter in the disc slot. Remove any foreign matter, or consult a service station.
Why are video images not displayed on my Clarion Car Video System?
If video images are not displayed on your Clarion Car Video System, ensure that the parking brake is engaged.
Why is the Clarion Car Video System sound bad directly after power is turned on?
If the sound quality of your Clarion Car Video System is poor immediately after turning it on, condensation may have formed on the internal lens. Allow the unit to dry for about 1 hour with the power on.
General| Brand | Clarion |
|---|---|
| Model | NX405 |
| Category | Car Receiver |
| Language | English |
