Clarion NX604 - Entering an Address with a ZIP Code

3.1.2.7 Entering an address with a ZIP code
All of the above address searching possibilities can be performed with entering the ZIP code instead of
the city/town name. Find below an example with a full address:
1. If you are on the Map screen, tap
to return to the Navigation menu.
2. In the Navigation menu, tap the following buttons:
, .
3. Select the country and state as described earlier (page 35).
4. Enter a new city/town using its ZIP code:
a. Tap
.
b. Tap
to open the numeric keypad.
c. Start entering the ZIP code.
d. Find the city/town you need:
• The most likely ZIP code is always shown in the input field. To accept it, tap
.
• If the desired number does not show up, open the list of results by tapping
. Select the ZIP code from the list.
5. Enter the street name:
a. Tap
.
b. Start entering the street name on the keyboard.
c. Find the street you need:
• The most likely street name is always shown in the input field. To accept it, tap
.
NX604 English 47