This feature allows you to receive a warning when approachin
g a Road Safety
Camera or other alert points like school zones or railroad crossings. You must
ensure on your own liability that using this feature is legal in the country where you
intend to use it.
You can set the alert for the different alert point cat
egories individually. The
following alert types are available:
• Audio warning: beeps can be played while you are approaching one of these
points, or extra alert sounds if you exceed the given speed limit while
approaching.
• Visual warning: the type of the alert point, its distance and the related speed
limit appear on the Map screen while you are approaching one of these
cameras.
For some of the alert points, the enforced or expected speed limit is available. For
these points, the audio alert can be different
if you are below or above the given
speed limit.
• Only when speeding: The audio alert is only played when you exceed the
given speed limit.
• When approaching: The audio alert is always played when approaching one
of these alert points. In order to draw your attention, the alert is different
when you exceed the speed limit.
Maps may contain driver alert information. Tap this button to turn on or off the
warnings and to set the distance from the hazard to receive the warning at. These
can be set individually for the different warning types.
This button turns the voice notification on or off for the event that the GPS signal is
lost during navigation.
You can control the volume of the following sound types:
These controls affect the volume of the guidance sounds (verbal instructions).
They can also be accessed from the Quick menu.
Controls for each sound type:
Adjusts the volume of the related sound.
Use the switch to mute the related sound. The slider becomes inactive. Tap again to
re-enable.
96 NX604 English
To Next Page
Loading...
Need help?
General
