Clarion NZ501E - Installing in Toyota Vehicles; Route Simulation

62 NX501E/NZ501E English
1. Browse the map and select the alert point to edit. The red circle appears around the
alert point.
2. Tap
.
3. Scroll down the list and tap
.
4. On the newly opened screen, modify the type of the alert point, the direction from
which you expect the alert, or (if applicable) the speed limit for this alert point.
5. Tap
to save the changes to the alert point.
3.8 Watching the simulation of the route
You can run a simulated navigation that demonstrates the active route. Do as follows:
1. If you are on the Map screen, tap
to return to the Navigation
menu.
2. In the Navigation menu, tap
.
3. Tap
.